Spreading the word about drill press safety

In the past five years, more than 60 workers in B.C. were injured by drill presses. One safety officer says education is key to preventing such incidents. 

Drawing of a drill press with key parts labelled

Photo credit: © WorkSafeBC (Workers’
Compensation Board of B.C.), used
with permission

Mark Phifer, an occupational safety officer (OSO) with WorkSafeBC, has been doing inspections and attending incidents at B.C. workplaces for almost 20 years. Many of those incidents involved drill presses.

He told me that enforcement is only part the job for an OSO. Equally important is educating and consulting with employers.

“I take my time to explain incidents that I’ve seen and been made aware of,” he says. “I talk about the hazards and then go through the steps of what employers can do to protect their workers.”

“When you deal with certain types of incidents on a regular basis, you see that simple things, prior to an incident, could have prevented it.”

For example, in 2017 a worker was seriously injured while using a drill press. The worker’s sleeve was caught in the drill bit, which then pulled in his arm. He had only been working at the manufacturing company for a few months — with less than a week of experience using the drill press.

“Once a drill bit catches onto something, you just get wrapped up instantly,” says Mark, describing how quickly the worker’s life changed. “There’s no time to react — no time to pull away.”

Protecting drill press operators from hazards

One of the biggest hazards to drill press operators is the lack of safeguarding. Mark says drill presses don’t always come with safeguards so those may need to be purchased separately. And the most common cause of injury is wearing loose clothing. Put together a lack of safeguarding and wearing loose clothing, and you can see how both employers and workers have roles to play in preventing incidents like the one Mark told me about.

Many workplaces and shop classes have drill presses. And even though they generally aren’t used often, it’s essential that people have proper training and personal protective equipment before operating them. That’s why Mark teamed up with other subject matter experts to create a new safety bulletin on Using drill presses safely (WorkSafeBC).

Says Mark: “I felt it was really important that people had information about the hazards associated with using drill presses and what steps they could take to protect themselves.”

Thanks to Mark for answering all my questions about his work.

Share this safety message:
Share

5 thoughts on “Spreading the word about drill press safety

  1. Tom Richardson

    Drill presses typically do NOT come with guards and aftermarket ones can be cheap and cause more problems than they are worth. If you are going to put a guard on, by a good one.

    Having said that, the most important thing is NO gloves or loose fitting sleeves. I had a friend who was using gloves and the drill bit caught his middle finger of the glove and ripped of the finger along with 12″ of tendon from his arm. He now has three fingers on one hand.

    Reply
  2. Dan O'Connell

    I strongly recommend you look into guards from Rockford Systems. They have some new ones called PROTECTOR that are pretty amazing and very easy to install. I put one on a drill press the other day, and was surprised how well it fit.

    Reply

Leave a Reply to Susan Cancel reply

Your email address will not be published. Required fields are marked *